The EUROFLEX® jungle animals bring huge flexibility to the design of playgrounds and indoor play areas. EUROFLEX® Elephants and Rhinos can be used as more than just playthings, and can also be used as little islands in playgrounds and kindergartens.

As a material, rubber is warm to the touch, dries quickly when wet, is highly resistant to weathering, non-splintering, soft and therefore safe.  The base plate increases the rigidity of the thick-skinned EUROFLEX ® animals and contributes to the toy's safety (indoor). An easily-installed ground socket enables the Elephant and Rhino to stand proud outdoors and makes for easy installation and removal. The wide EPDM color range available also opens up a host of design options.

Technical data.

2. Apply 1-component polyurethane adhesive cement to the mounting tubes.

3. Slip the Elephant/Rhino over the mounting tubes; adhesive cement will dry overnight. Base enhances the rigidity of the animals. When glued in this way, the unit can only be separated with great effort for safety reasons.

1. Use the cardboard template provided to screw the anchor fixings into the ground at the right intervals.

2. Use the fixing screw to fix the mounting tubes in the anchors.

3. Apply 1-component polyurethane adhesive cement to the mounting tubes.

4. Slip the Elephant/Rhino over the mounting tubes; adhesive cement will dry overnight.

5. To remove the unit in wintertime, first loosen the fixing screws, pull the animal out of the base anchors together with the mounting tubes. Use the protective cap to keep water out of the base anchor in winter.